Deck Keyboards • View topic

drsauced · **Joined:** Mon Mar 07, 2011 12:54 am **Posts:** 3

Hello There,

I have recently taken delivery of a Legend Ice PS/2 and I discovered something interesting about the capslock, numlock, and scrolllock LED's while messing around today. Usually these status LED's would dim and brighten with the FN+up arrow or FN+dwn arrow keys, but today, they stopped doing that and became somewhat solid brightness. That is, when I turned off the backlight on the keyboard, the status LED's would also turn completely off. Today however, the status LED's remain lit even if the backlight LED's are completely off. LOLWHUT?

What keys did I hit? This is a mystery!

Thanks!

Love the Deck! I bought a linear, but everybody, buy the tactile while you still can!

DeckGuy Adam · **Posted:** Mon Mar 07, 2011 8:53 am

Try pressing FN + CAPS LOCK. From our user manual:

Quote:

The keyboard has non-volatile memory to save the backlighting level as well as the brightness mode of the Num, Caps
and Scroll Lock LEDs (status LEDs). There are two status LED modes. The first mode has the status LEDs dim along
with the backlighting LEDs of the keys. The second mode is a “daylight” mode in which the status LEDs remain bright
at all backlighting brightness levels - even if the backlighting is turned “off”. Please note that the status LEDs will dim
slightly as the backlighting levels decrease toward level 1. The status LED mode is toggled by pressing “Fn” followed
by “Caps Lock” key. Just as with the dimming operation, no “Caps Lock” key information is sent to the PC when the
“Fn” key is down. If the non-volatile memory fails, the default power-on settings are level 7 brightness and the status
LEDs dim along with the backlighting of the keys.

drsauced · **Joined:** Mon Mar 07, 2011 12:54 am **Posts:** 3

Ouch, RTFM! I do apologize.

Thank you kindly!

Status LED question

Who is online