It is currently Thu Oct 02, 2014 2:28 am

All times are UTC - 6 hours





Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: 105 key usb cable type interface @ keyboard?
PostPosted: Fri May 04, 2007 12:33 am 
Offline
 Profile

Joined: Fri May 04, 2007 12:17 am
Posts: 3
:?: On the 82 key it says it uses a A type plug at computer to a B type on the keyboard. What about on the legend 105 key ? I wana put a led lit usb cable on, not sure what type of connection is uses in the keyboard, I actully was under the impression that the keyboard came with a led lit usb and a diamond plate aluminium bottom :cry: , The web page is a little mis leading when you read about the keyboard stats it dosent say only on 82 key? It really should! But other than that im really likin the product!


Top
 

 Post subject:
PostPosted: Fri May 04, 2007 2:10 am 
Offline
 Profile

Joined: Sat Apr 23, 2005 4:08 pm
Posts: 44
Hi Ray,

The cable is actually USB type A on one end, and PS/2 on the other. That way, you use the same cable if you convert the keyboard from USB to PS/2 (or vice versa). It may be difficult to find a LED cable like that, so you may have to hack one together or do some soldering.


Top
 

 Post subject:
PostPosted: Fri May 04, 2007 9:16 am 
Offline
 Profile

Joined: Fri May 04, 2007 12:17 am
Posts: 3
So the connection is ps/2 inside the actual keyboard? Seems like if it was being switched to ps/2 then you would need a cable that had ps/2 connections on both end? if it is indeed ps/2 then you are probbly correct , I dont think ill be able to find a cable thats lit with those connections :cry:


Top
 

 Post subject:
PostPosted: Fri May 04, 2007 12:22 pm 
Offline
 Profile

Joined: Fri May 04, 2007 12:17 am
Posts: 3
so is it a male or female ps/2 connection @ the keyboard side of cable?


Top
 

 Post subject:
PostPosted: Fri May 04, 2007 4:03 pm 
Offline
Site Admin
User avatar
 WWW  Profile

Joined: Tue Aug 09, 2005 1:48 pm
Posts: 463
Location: Kenosha, WI
The cable is male USB type A (male) on one end and PS2 male on the other. The connectors on the circuit board are both female. You will probably not be able to find a lighted cable for this but you could try and solder one up (I wouldn't reccomend this but I can't stop you! :D )

_________________
Deck Guy Adam
http://www.deckkeyboards.com - The best backlit keyboards on Earth
http://www.tg3electronics.com - Parent company of Deck, leaders in custom industrial keyboards


Top
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 6 hours



Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group  
Design By Poker Bandits