stencil, then airbrush would work good I would do that if you had a airbrush gun, But what I did was covered the housing with masking tap (it’s a paper tape any kind) then just drew out the flames that I wanted and took a x-acto and cut on the lines peeled what I didn’t want off and sprayed the paint. Hope this helps and good luck bud.
Joined: Mon Jun 06, 2005 12:37 am Posts: 4 Location: Virginia, USA
Very nice mods!
_________________ XP 3200, ATI 800XT PE, Corsair XMS 3200, Audigy 2, 2 120 GB SATA drives in Raid 0, Ultra XConnect PSU, LG SuperMulti DVD Drive, 2 RED 120mm Case Fans, 2 RED CC Lights, 1 RED 80mm Window Fan under 1 UV 80mm illuminating 1 BLUE 80mm Galactic Imperial Symbol